Avengers 679 Marvel 2018 NM 2nd Print Aaron Kim Jacinto Variant
$20.00$16.00
- Email: [email protected]
$56.00
$28.00
MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement, private security and also IoT sensor networks.
Wio Tracker L1 Pro for Meshcore comes with pre-flashed Meshcore Bluetooth Companion firmware. If you want to buy L1 Pro with pre-flashed Meshtastic firmware, please click here to buy.
- Ready-to-Use 3D-Printed Enclosure
The L1 Pro comes with a rugged, lightweight 3D-printed enclosure designed for immediate useno additional assembly needed. Whether handheld or clipped onto gear, its built for adventure in any environment.
- Pre-flashed with Meshcore firmware
Ready to use out of the box with pre-installed Meshcore Bluetooth Companion firmware for seamless setup.
- Triple Power Supply Options
Equipped with a built-in 2000 mAh battery, Type-C fast charging, and solar input support, enabling flexible deployment in diverse environmentsperfect for outdoor and mobile use.
Processor | Nordic nRF52840ARM Cortex-M4 with FPU runs up to 64 MHz |
On-chip Memory | 1 MB flash and 256 kB RAM |
Wireless | LoRa: Based on Wio-SX1262 Wireless Module,supports 862-930MHz |
Bluetooth 5.0 | |
GPS | L76K(GPS,BeiDou,GLONASS,QZSS) |
OLED Display | Size: 1.3 inch |
Resolution: 128*64 pixels | |
Active Area(mm): L34.5*W23.0*H1.47 | |
Power | Type-C: 5v---1A |
Solar energy interface(2.0mm 2p):5V---1A | |
Baterry interface(1.0mm 2p JST): 3.7v---1A | |
Certification | FCC, CE, RoHSEUDOC,TELEC,UKDOC |
Wio Tracker Ll Pro 3D-Shell Reference Document
Hardware Schematic Diagram
Seeed Wio Tracker L1 Power Consumption Test and Battery Life Calculation
Wio Tracker L1 Board with 1.3 inch OLED Display, 3D-Printed Enclosure and battery | x1 |
LoRa Antenna | x1 |
| HSCODE | 8526919090 |
| USHSCODE | 8526910040 |
| UPC | |
| EUHSCODE | 8517180000 |
| COO | CHINA |
Array
MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement, private security and also IoT sensor networks.
Wio Tracker L1 Pro for Meshcore comes with pre–flashed Meshcore Bluetooth Companion firmware. If you want to buy L1 Pro with pre–flashed Meshtastic firmware, please click here to buy.
- Ready-to-Use 3D-Printed Enclosure
The L1 Pro comes with a rugged, lightweight 3D-printed enclosure designed for immediate useno additional assembly needed. Whether handheld or clipped onto gear, its built for adventure in any environment.
- Pre-flashed with Meshcore firmware
Ready to use out of the box with pre-installed Meshcore Bluetooth Companion firmware for seamless setup.
- Triple Power Supply Options
Equipped with a built-in 2000 mAh battery, Type-C fast charging, and solar input support, enabling flexible deployment in diverse environmentsperfect for outdoor and mobile use.
|
Processor |
Nordic nRF52840ARM Cortex-M4 with FPU runs up to 64 MHz |
|
On-chip Memory |
1 MB flash and 256 kB RAM |
|
Wireless |
LoRa: Based on Wio-SX1262 Wireless Module,supports 862-930MHz |
|
Bluetooth 5.0 |
|
|
GPS |
L76K(GPS,BeiDou,GLONASS,QZSS) |
|
OLED Display |
Size: 1.3 inch |
|
Resolution: 128*64 pixels |
|
|
Active Area(mm): L34.5*W23.0*H1.47 |
|
|
Power |
Type-C: 5v—1A |
|
Solar energy interface(2.0mm 2p):5V—1A |
|
|
Baterry interface(1.0mm 2p JST): 3.7v—1A |
|
|
Certification |
FCC, CE, RoHSEUDOC,TELEC,UKDOC |
Wio Tracker Ll Pro 3D-Shell Reference Document
Hardware Schematic Diagram
Seeed Wio Tracker L1 Power Consumption Test and Battery Life Calculation
|
Wio Tracker L1 Board with 1.3 inch OLED Display, 3D-Printed Enclosure and battery |
x1 |
|
LoRa Antenna |
x1 |
| HSCODE | 8526919090 |
| USHSCODE | 8526910040 |
| UPC | |
| EUHSCODE | 8517180000 |
| COO | CHINA |
Array
0 reviews for Wio Tracker L1 Pro for Meshcore
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *