MaAnt MY-228 3Pcs BGA PCB No-Clean Solder Paste Welding Advanced Oil Flux Grease 20ML Soldering Repair Paste
$13.00$6.00
- Email: [email protected]
$13.09
$10.47
The turbidity detects water quality by measuring the level of cloudiness or Total Suspended Solids (TSS). It uses an infrared (IR) transmitter and receiver to measure light transmittance; as water becomes muddier, fewer light waves pass through, reducing the sensor's output voltage.Technical SpecificationsThese modules generally feature standard industrial specifications:
- Operating Voltage: 5V DC (fully compatible with Arduino Uno/Nano)
- Current Consumption: Max 30mA to 40mA
- Output Modes: Dual output. Analog (0 to 4.5V range where higher voltage means clearer water) and Digital (High/Low output with an adjustable threshold potentiometer).
- Detection Range: 0 to 4000+ NTU (Nephelometric Turbidity Units)
- Response Time: Less than 500ms
| Sensor Adapter Board Pin | Arduino Pin | Description |
|---|---|---|
| VCC / + | 5V | Main power source |
| GND / - | GND | Ground connection |
| AOUT / Signal | A0 | Analog input for variable voltage reading |
The turbidity detects water quality by measuring the level of cloudiness or Total Suspended Solids (TSS). It uses an infrared (IR) transmitter and receiver to measure light transmittance; as water becomes muddier, fewer light waves pass through, reducing the sensor’s output voltage.Technical SpecificationsThese modules generally feature standard industrial specifications:
- Operating Voltage: 5V DC (fully compatible with Arduino Uno/Nano)
- Current Consumption: Max 30mA to 40mA
- Output Modes: Dual output. Analog (0 to 4.5V range where higher voltage means clearer water) and Digital (High/Low output with an adjustable threshold potentiometer).
- Detection Range: 0 to 4000+ NTU (Nephelometric Turbidity Units)
- Response Time: Less than 500ms
Wiring Guide (Sensor to Arduino)The typical kit comes in three parts: the waterproof probe head, a signal converter board, and a jumper cable. Connect the adapter board to your Arduino board as follows:
| Sensor Adapter Board Pin | Arduino Pin | Description |
|---|---|---|
| VCC / + | 5V | Main power source |
| GND / – | GND | Ground connection |
| AOUT / Signal | A0 | Analog input for variable voltage reading |
0 reviews for Water Monitoring Turbidity Sensor
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *