Simpson 14-15/16" Galvanized Light Tension Tie LTTP2

• Model No.LTTP2
• Gauge. 10
• Width (in.) 2 9/16
• Length (in.) 14 15/16
• Coating/Material. Zinc Galvanized, G90

The LTTP2 model, for wood joist attachments, features an extruded anchor bolt hole to accommodate 1/2″, 5/8″ and 3/4″ bolt diameters. It also features two separate nailing patterns: obround holes spaced 3″ apart for I-joist purlins and square holes spaced to accommodate the narrow face of 2x solid-sawn purlins.

The LTTP2 may be installed vertically on the wide face of a minimum 2×4 stud for holdown applications and can be fastened with nails or Strong-Drive SD Connector screws.

Key Features

• Nailing patterns to accommodate different purlin/rafter/truss types
• Low-profile seat to reduce visibility of tie
• Tested with different anchor bolt diameters to meet code-required applications based on substrate
• Install with (12) 0.148 in. x 1-1/2 in. nails OR 0.148 in. x 2-1/2 in. nails into obround holes OR (15) 0.148 in. x 2-1/2 in. nails into square holes, AND (1) 1/2 in., 5/8 in. OR 3/4 in. anchor bolt