Plug & Play Bosch Engine ECU, FoMoCo, 0261S18396, 0 261 S18 396
$749.99$150.00
- Email: [email protected]
$24.00
$19.20
The SIM7020E NB-IoT Module for the Raspberry Pi Pico is an NB-IoT (NarrowBand-Internet of Things) module designed for Raspberry Pi Pico. It supports multiple NB-IoT frequency bands, can be controlled via serial AT commands, and supports communication protocols like HTTP/MQTT/LWM2M/COAP, etc.
Due to the advantages of low delay, low power, low cost, and wide range of coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring for the Asia, Europe, Africa, Australiaregions.
Features
- Standard Raspberry Pi Pico header supports Raspberry Pi Pico series boards
- UART communication, serial AT commands control, multiple communication protocols support, multiple cloud platform support
- Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery
- 2x LED indicators, for monitoring the module operating status
- Onboard Nano SIM card slot for NB-IoT specific card
- Comes with development resources and manual (MicroPython examples)
Raspberry Pi Pico Header Compatibility
The Pico can be SMD-mounted (Left), or attached via a female header (Right).
Specifications
| Frequency band | |
| NB-IoT | LTE-FDD: B1/B3/B5/B8/B20/B28 |
| Cat-M | N/A |
| 2G | N/A |
| GNSS | N/A |
| Data Rate | |
| NB-IoT | 26.15(DL)/62.5(UL) |
| Cat-M | N/A |
| 2G | N/A |
| Other | |
| Communication Protocol | TCP/UDP/HTTP/HTTPS/TLS/DTLS |
| /PING/LWM2M/COAP/MQTT | |
| Power Supply | External Li-po battery OR Raspberry Pi Pico USB port |
| Battery Interface | 3.7V ~ 4.2V |
| Idle Mode Current | 5.6mA |
| Sleep Mode Current | 0.4mA |
| PSM Mode Current | 3.4uA |
| Audio input/output | N/A |
| Status Indicators | NET: network indicator |
| Charge: recharge indicator | |
| SIM card | NB card (1.8V / 3V) |
| Antenna Connector | LTE |
| Dimensions | 73.5 x 24.00mm |
Resources
- Waveshare Wiki
Pinout
Package Contents
- 1x Pico-SIM7020E-NB-IoT
- 1x Antenna
- 2x 20-PIN female pin header
- 1x 40-PIN male pin header
- 1x 3.7V rechargeable Li-po battery
The SIM7020E NB-IoT Module for the Raspberry Pi Pico is an NB-IoT (NarrowBand-Internet of Things) module designed for Raspberry Pi Pico. It supports multiple NB-IoT frequency bands, can be controlled via serial AT commands, and supports communication protocols like HTTP/MQTT/LWM2M/COAP, etc.
Due to the advantages of low delay, low power, low cost, and wide range of coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring for the Asia, Europe, Africa, Australiaregions.
Features
- Standard Raspberry Pi Pico header supports Raspberry Pi Pico series boards
- UART communication, serial AT commands control, multiple communication protocols support, multiple cloud platform support
- Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery
- 2x LED indicators, for monitoring the module operating status
- Onboard Nano SIM card slot for NB-IoT specific card
- Comes with development resources and manual (MicroPython examples)
Raspberry Pi Pico Header Compatibility
The Pico can be SMD-mounted (Left), or attached via a female header (Right).
Specifications
| Frequency band | |
| NB-IoT | LTE-FDD: B1/B3/B5/B8/B20/B28 |
| Cat-M | N/A |
| 2G | N/A |
| GNSS | N/A |
| Data Rate | |
| NB-IoT | 26.15(DL)/62.5(UL) |
| Cat-M | N/A |
| 2G | N/A |
| Other | |
| Communication Protocol | TCP/UDP/HTTP/HTTPS/TLS/DTLS |
| /PING/LWM2M/COAP/MQTT | |
| Power Supply | External Li-po battery OR Raspberry Pi Pico USB port |
| Battery Interface | 3.7V ~ 4.2V |
| Idle Mode Current | 5.6mA |
| Sleep Mode Current | 0.4mA |
| PSM Mode Current | 3.4uA |
| Audio input/output | N/A |
| Status Indicators | NET: network indicator |
| Charge: recharge indicator | |
| SIM card | NB card (1.8V / 3V) |
| Antenna Connector | LTE |
| Dimensions | 73.5 x 24.00mm |
Resources
- Waveshare Wiki
Pinout
Package Contents
- 1x Pico-SIM7020E-NB-IoT
- 1x Antenna
- 2x 20-PIN female pin header
- 1x 40-PIN male pin header
- 1x 3.7V rechargeable Li-po battery
0 reviews for SIM7020E NB-IoT Module For Raspberry Pi Pico
There are no reviews yet. Be the first to review this product!
Related Products
The iProbe
$14.00$11.20
Add a review
Your email address will not be published. Required fields are marked *