Salty Seductions Of Slatious Sea (02/16/2022) Source Point
$3.99$3.19
- Email: [email protected]
$12.99
$10.39
Seeed Studio XIAO ESP32S3 Plus, powered by ESP32-S3's 240MHz Xtensa 32-bit LX7 dual-core processor,brings more SMD pins to the tinyversatileXIAO ESP32S3. While maintaining all the powerful features including Wi-Fi and BLE 5.0 wireless connectivities , 2.4GHz Rod antenna, and ultra-low power consumption of 14A in deep sleep mode with lithium battery charging management, the XIAO ESP32S3 Plus variantfeatures redesigned castellations and pad layout on the back , offering 9 additional GPIOs specifically for advanced Bluetooth projects requiring expanded I/Os via SMD board-to-board soldering.It's ideal for advanced IoT projects , Smart Homes , and professional wireless devices requiring extra I/O connectivity.This Wi-Fi & BLE Board with Extended GPIO also features 16MB Flash memory for more demanding applications. The XIAO ESP32S3 Plus is compatible with Arduino, MicroPython, and ESP-IDF , making it a versatile choice for embedded development.
Feature
- High-Performance MCU: Dual-core ESP32-S3 at 240MHz, Arduino / MicroPython / ESP-IDF compatible
- Advanced Wireless: 2.4GHz Wi-Fi + BLE 5.0, 100m+ range with U.FL antenna support
- Efficient Power Management: Four power modes with 14A deep sleep, integrated Li-ion charging
- Expanded 20 GPIOs: 9 extra 1.27mm pitch SMD castellation pins beyond standard XIAO nRF52840
- Universal Compatibility: Standard backside layout (with aligned battery pads and debugger pads) for upcoming XIAO expansion boards
- Classic XIAO Form Factor: 21 x 17.8mm design with 2.54mm pin headers, single-sided mounting for wearables and space-constrained projects
- XIAO Accessory Add-ons Compatibility: Fully compatible with all XIAO accessory add-ons including expansion modules (LoRa, CAN Bus, RS-485), sensors (2-Mic Array, Vision AI, mmWave Motion, Environmental sensing), and actuators (ePaper display, LED Matrix, relay and more)
Specification
Item | Seeed Studio XIAO ESP32S3 | Seeed Studio XIAO ESP32S3 Plus |
Processor | ESP32-S3R8 Xtensa LX7 dual-core, 32-bit processor that operates at up to 240 MHz | |
Wireless | Complete 2.4GHz Wi-Fi subsystem BLE: Bluetooth 5.0, Bluetooth mesh | |
Memory | On-chip 8M PSRAM & 8MB Flash | On-chip 8M PSRAM &16MBFlash |
Interface | 1x UART, 1x IIC, 1x IIS, 1x SPI, 11x GPIOs (PWM), 9x ADC, 1x User LED, 1x Charge LED 1x Reset button, 1x Boot button | 2x UART, 1x IIC, 1x IIS,2x SPI,18x GPIOs (PWM), 9x ADC, 1x User LED, 1x Charge LED, 1x B2B Connector, 1x Reset button, 1x Boot button |
Dimensions | 21 x 17.8mm | |
Power | Input voltage (Type-C): 5V Input voltage (BAT): 4.2V | |
Circuit operating Voltage (ready to operate): - Type-C: 5V@19mA - BAT: 3.8V@22mA | Circuit operating Voltage (ready to operate): - Type-C: 5V@28mA - BAT: 3.8V@35mA | |
Charging battery current:100mA | ||
Low Power Consumption Model | Modem-sleep Model:3.8V/25 mA Light-sleep Model:3.8V/2 mA Deep Sleep Model:3.8V/14 A | Modem-sleep Model:3.8V/26.5 mA Light-sleep Model:3.8V/2.2 mA Deep Sleep Model:3.8V/69 A |
Wi-Fi Enabled Power Consumption | Active Model:~ 100 mA | Active Model:~ 85 mA |
BLE Enabled Power Consumption | Active Model:~ 85 mA | Active Model:~ 77 mA |
Working Temperature | -40C ~ 65C |
Hardware Overview
Onboard
PinOut
Application
Internet of Things
Wearable Devices
Smart Homes
Robotics
Health Monitoring
Education
ESP-Now Communication
Low-Power (LP) Networking
Documents
Getting Started with Seeed Studio XIAO ESP32S3 Series | Seeed Studio WikiSchematicPCN-XIAO Series Packaging Upgrade.pdf| HSCODE | 8543709990 |
| USHSCODE | 8517180050 |
| UPC | |
| EUHSCODE | 8543709099 |
| COO | CHINA |
Part List
Seeed StudioXIAO ESP32S3 Plus 1
Please note: The XIAO ESP32S3 Plus does not include 7-pin headers, as it is specifically designed for SMD board-to-board soldering to support compact and professional layouts.
Seeed Studio XIAO ESP32S3 Plus, powered by ESP32-S3’s 240MHz Xtensa 32-bit LX7 dual-core processor,brings more SMD pins to the tinyversatileXIAO ESP32S3. While maintaining all the powerful features including Wi-Fi and BLE 5.0 wireless connectivities , 2.4GHz Rod antenna, and ultra-low power consumption of 14A in deep sleep mode with lithium battery charging management, the XIAO ESP32S3 Plus variantfeatures redesigned castellations and pad layout on the back , offering 9 additional GPIOs specifically for advanced Bluetooth projects requiring expanded I/Os via SMD board-to-board soldering.It’s ideal for advanced IoT projects , Smart Homes , and professional wireless devices requiring extra I/O connectivity.This Wi-Fi & BLE Board with Extended GPIO also features 16MB Flash memory for more demanding applications. The XIAO ESP32S3 Plus is compatible with Arduino, MicroPython, and ESP-IDF , making it a versatile choice for embedded development.
Feature
- High-Performance MCU: Dual-core ESP32-S3 at 240MHz, Arduino / MicroPython / ESP-IDF compatible
- Advanced Wireless: 2.4GHz Wi-Fi + BLE 5.0, 100m+ range with U.FL antenna support
- Efficient Power Management: Four power modes with 14A deep sleep, integrated Li-ion charging
- Expanded 20 GPIOs: 9 extra 1.27mm pitch SMD castellation pins beyond standard XIAO nRF52840
- Universal Compatibility: Standard backside layout (with aligned battery pads and debugger pads) for upcoming XIAO expansion boards
- Classic XIAO Form Factor: 21 x 17.8mm design with 2.54mm pin headers, single-sided mounting for wearables and space-constrained projects
- XIAO Accessory Add-ons Compatibility: Fully compatible with all XIAO accessory add-ons including expansion modules (LoRa, CAN Bus, RS-485), sensors (2-Mic Array, Vision AI, mmWave Motion, Environmental sensing), and actuators (ePaper display, LED Matrix, relay and more)
Specification
|
Item |
Seeed Studio XIAO ESP32S3 |
Seeed Studio XIAO ESP32S3 Plus |
|
Processor |
ESP32-S3R8 Xtensa LX7 dual-core, 32-bit processor that operates at up to 240 MHz |
|
|
Wireless |
Complete 2.4GHz Wi-Fi subsystem BLE: Bluetooth 5.0, Bluetooth mesh |
|
|
Memory |
On-chip 8M PSRAM & 8MB Flash |
On-chip 8M PSRAM &16MBFlash |
|
Interface |
1x UART, 1x IIC, 1x IIS, 1x SPI, 11x GPIOs (PWM), 9x ADC, 1x User LED, 1x Charge LED 1x Reset button, 1x Boot button |
2x UART, 1x IIC, 1x IIS,2x SPI,18x GPIOs (PWM), 9x ADC, 1x User LED, 1x Charge LED, 1x B2B Connector, 1x Reset button, 1x Boot button |
|
Dimensions |
21 x 17.8mm |
|
|
Power |
Input voltage (Type-C): 5V Input voltage (BAT): 4.2V |
|
|
Circuit operating Voltage (ready to operate): – Type-C: 5V@19mA – BAT: 3.8V@22mA |
Circuit operating Voltage (ready to operate): – Type-C: 5V@28mA – BAT: 3.8V@35mA |
|
|
Charging battery current:100mA |
||
|
Low Power Consumption Model |
Modem-sleep Model:3.8V/25 mA Light-sleep Model:3.8V/2 mA Deep Sleep Model:3.8V/14 A |
Modem-sleep Model:3.8V/26.5 mA Light-sleep Model:3.8V/2.2 mA Deep Sleep Model:3.8V/69 A |
|
Wi-Fi Enabled Power Consumption |
Active Model:~ 100 mA |
Active Model:~ 85 mA |
|
BLE Enabled Power Consumption |
Active Model:~ 85 mA |
Active Model:~ 77 mA |
|
Working Temperature |
-40C ~ 65C |
Hardware Overview
Onboard
PinOut
Application
-
Internet of Things
-
Wearable Devices
-
Smart Homes
-
Robotics
-
Health Monitoring
-
Education
-
ESP-Now Communication
-
Low-Power (LP) Networking
Documents
Getting Started with Seeed Studio XIAO ESP32S3 Series | Seeed Studio WikiSchematicPCN-XIAO Series Packaging Upgrade.pdf
| HSCODE | 8543709990 |
| USHSCODE | 8517180050 |
| UPC | |
| EUHSCODE | 8543709099 |
| COO | CHINA |
Part List
-
Seeed StudioXIAO ESP32S3 Plus 1
Please note: The XIAO ESP32S3 Plus does not include 7-pin headers, as it is specifically designed for SMD board-to-board soldering to support compact and professional layouts.
0 reviews for Seeed Studio XIAO ESP32S3 Plus Wi-Fi & BLE Board with Extended GPIO
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *