Gravity: 5V Non-contact Liquid Level Sensor
$12.00$9.60
- Email: [email protected]
$14.99
$11.99
This MCU Board has the RP2040 microcontroller chip from Raspberry Pi and a dual-core Arm Cortex M0+ processor that runs up to 133 MHz. It includes 264KB of SRAM and 2MB of flash memory for storing code and data. It comes with a small, round 0.99" IPS LCD that has a 128 x 115 resolution and 65K colours for clear and colourful visuals. The board is compatible with programming in C/C++, MicroPython, and Arduino, making it versatile for various projects, and it is put in a CNC metal case with an acrylic bottom, providing durability so you can have peace of mind if you take it anywhere.
Features
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- Type-C connector, keeps it up to date, easier to use
- Onboard 0.99" 128 x 115 pixels 65K colourful IPS LCD display (with flat bottom) for clear colour pictures
- 4 x GPIO pins are adapted through the SH1.0 6PIN connector
- Has a CNC metal case with Acrylic dull-polish bottom plate
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 2 x I2C, 4 x 12-bit ADC
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 x Programmable I/O (PIO) state machines for custom peripheral support
Specifications
| Controller | GC9107 |
| Communication Interface | SPI |
| Display Panel | IPS |
| Resolution | 128(H) RGB x 115(V) |
| Display Dimensions | 33mm |
| Pixel Size | 0.19(H) x 0.19(v) mm |
Resources
- Product Wiki
- Schematic
- Datasheet
Pinout
- USB Type-C connector
For programming, USB 1.1 with device and host support - RT9013-33GB
500mA low dropout, low noise, ultra-fast LDO - QMI8658C
IMU includes a 3-axis gyroscope and a 3-axis accelerometer - W25Q16JVUXIQ
2MB NOR-Flash - RP2040
Dual-core processor, up to 133MHz operating frequency - SH1.0 6PIN connector
Adapting 4 x GPIO pins, the pin order is: GND, 3V3, GP26~GP29 - BOOT Button
Press it when powering on to enter download mode
Package Contents
- 1x RP2040 MCU Board
- 1x SH1.0 6-Pin cable
This MCU Board has the RP2040 microcontroller chip from Raspberry Pi and a dual-core Arm Cortex M0+ processor that runs up to 133 MHz. It includes 264KB of SRAM and 2MB of flash memory for storing code and data. It comes with a small, round 0.99″ IPS LCD that has a 128 x 115 resolution and 65K colours for clear and colourful visuals. The board is compatible with programming in C/C++, MicroPython, and Arduino, making it versatile for various projects, and it is put in a CNC metal case with an acrylic bottom, providing durability so you can have peace of mind if you take it anywhere.
Features
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- Type-C connector, keeps it up to date, easier to use
- Onboard 0.99″ 128 x 115 pixels 65K colourful IPS LCD display (with flat bottom) for clear colour pictures
- 4 x GPIO pins are adapted through the SH1.0 6PIN connector
- Has a CNC metal case with Acrylic dull-polish bottom plate
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 2 x I2C, 4 x 12-bit ADC
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 x Programmable I/O (PIO) state machines for custom peripheral support
Specifications
| Controller | GC9107 |
| Communication Interface | SPI |
| Display Panel | IPS |
| Resolution | 128(H) RGB x 115(V) |
| Display Dimensions | 33mm |
| Pixel Size | 0.19(H) x 0.19(v) mm |
Resources
- Product Wiki
- Schematic
- Datasheet
Pinout
- USB Type-C connector
For programming, USB 1.1 with device and host support - RT9013-33GB
500mA low dropout, low noise, ultra-fast LDO - QMI8658C
IMU includes a 3-axis gyroscope and a 3-axis accelerometer - W25Q16JVUXIQ
2MB NOR-Flash - RP2040
Dual-core processor, up to 133MHz operating frequency - SH1.0 6PIN connector
Adapting 4 x GPIO pins, the pin order is: GND, 3V3, GP26~GP29 - BOOT Button
Press it when powering on to enter download mode
Package Contents
- 1x RP2040 MCU Board
- 1x SH1.0 6-Pin cable
0 reviews for RP2040 MCU Board with 0.99″ Round IPS LCD
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *