Rising Sun - 8k Nova UV Resin

Rising Sun – 8k Nova UV Resin is specifically formulated to showcase super-fine detail in full 8K resolutions. Works best with 8K printers; Rising Sun FPV – 8k Nova UV Resin is available in 5 colors to fulfill all your 3D printing needs.

Benefits

• Low Shrinkage & High PrecisionNova Resins are developed for low shrinkage and high precision printing. Their low warpage & dimensional stability are especially good for precise parts.
• Low Viscosity & Low OdorNova Resins are easy to print and are easily post-processed due to their low viscosity. Meanwhile, their low odor will not make your place smell.
• Wide ApplicationPrinted parts are tough and resilient. Nova Resins make them a perfect match not only for painted models but also for industrial applications.

Specifications

• Size – 1000ml bottle
• Wavelength – 405nm UV
• Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 2-15s depending on printer. (Pleaseuse the printingexposure list below for your printer settings.)
• Suitable for most DLP/LCD 3D printers
• Density: 1.1 g/cm3
• Viscosity: 280-380 cps
• Surface Hardness: 82 Shore D
• UTS: 43 MPa
• Tensile modulus: 1730 MPa
• Elongation at Break, EAB: 8 %
• Izod notched impact strength: 10 J/m

Precautions:

• Storage method:

1. Keep away from sunlight andUV light.
2. Werecommended to store Nova Resin at 15 -35 ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality.
3. Nova Resinhas a shelf life of up to 18 months.
4. After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.

5. Do not drink it and keep it sealed and out of the reach of children.

• Usage:

1. Shake well before use.
2. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
3. Inadvertent contact, as soon as possible use water to rinse area. If you feel unwell, seek timely medical attention.
4. Clean printed modelswith high-concentration alcohol (IPA95%-99%). Clean models for 30S-60s. Ensure all resin is removed and cleaned from inside the model.
5. Do not pour the resin into the resinalong with unused resin, and do not leave the resin in the resin vat for anextended period without use to avoid resin pollution.
6. DO NOT dump resin. Please cure it and treat it as general plastic garbage.

Documents

• Printer exposure settings
• MSDS