YW1L-M4E02Q0A Amber 22mm Mushroom Momentary Push Button Switch 2NC IP65 IDEC
$16.99$13.59
- Email: [email protected]
$12.00
$9.00
This ultra-compact Qwiic breakout allows you to use non-Qwiic I2C sensors/devices with your Qwiic-based project. It also allows you to do things the opposite way - breaking out Qwiic devices to simple pads for hooking up to your circuit in whatever way you decide - soldered wires, terminal blocks, headers and more.
Another handy way to use this breakout is to solder the included 4-pin header to the board and use it as a breadboard adapter for Qwiic devices - handy!
I2C and Qwiic devices use four lines for power and communication - GND, 3.3V, SDA and SCL. The pads on one side of this breakout connect these lines to two Qwiic connectors, and all share the same lines. This allows a few different use cases to help you hook up the parts from your project:
Use the breakout to:
- Connect a non-Qwiic I2C device to a Qwiic system
- Break a Qwiic sensor out to pads
- Join two Qwiic cables together using the two Qwiic ports (pads unused)
- Connect a Qwiic device AND a non-Qwiic device to a Qwiic host microcontroller (devices will require different I2C addresses)
- Connect two Qwiic devices to a breadboard using the included pin header (devices will require different I2C addresses)
- ...and more!
If you're soldering wires, consider using theunderside solder pads. We added these because we know just how tricky it is to de-solder and re-solder a wire from a pad hole. With the underside pads, it's much, much easier to re-work and re-use.
We also usedM2.5 mounting holesas they're a popular size with easy-to-source fixings...and because we detest fiddly M2 fixings.
Key Features
Ultra-compact Qwiic breakoutwith two Qwiic connectors
Qwiic pins broken out to pads for interfacing with non-Qwiic devices
Underside solder padsfor easy wire soldering and re-work
M2.5 mounting holesforfiddly-freemounting
ENIG (Gold) PCB platingfor oxidation resistance and durability
4-pin 2.54mm male header stripincluded!
Board Layout
Resources
- Assembly guide
- 3D Model (STEP)
Dimensions
Package Contents
- 1x Qwiic Breakout
- 1x 4-pin 2.54mm header strip
This ultra-compact Qwiic breakout allows you to use non-Qwiic I2C sensors/devices with your Qwiic-based project. It also allows you to do things the opposite way – breaking out Qwiic devices to simple pads for hooking up to your circuit in whatever way you decide – soldered wires, terminal blocks, headers and more.
Another handy way to use this breakout is to solder the included 4-pin header to the board and use it as a breadboard adapter for Qwiic devices – handy!
I2C and Qwiic devices use four lines for power and communication – GND, 3.3V, SDA and SCL. The pads on one side of this breakout connect these lines to two Qwiic connectors, and all share the same lines. This allows a few different use cases to help you hook up the parts from your project:
Use the breakout to:
- Connect a non-Qwiic I2C device to a Qwiic system
- Break a Qwiic sensor out to pads
- Join two Qwiic cables together using the two Qwiic ports (pads unused)
- Connect a Qwiic device AND a non-Qwiic device to a Qwiic host microcontroller (devices will require different I2C addresses)
- Connect two Qwiic devices to a breadboard using the included pin header (devices will require different I2C addresses)
- …and more!
If you’re soldering wires, consider using theunderside solder pads. We added these because we know just how tricky it is to de-solder and re-solder a wire from a pad hole. With the underside pads, it’s much, much easier to re-work and re-use.
We also usedM2.5 mounting holesas they’re a popular size with easy-to-source fixings…and because we detest fiddly M2 fixings.
Key Features
Ultra-compact Qwiic breakoutwith two Qwiic connectors
Qwiic pins broken out to pads for interfacing with non-Qwiic devices
Underside solder padsfor easy wire soldering and re-work
M2.5 mounting holesforfiddly-freemounting
ENIG (Gold) PCB platingfor oxidation resistance and durability
4-pin 2.54mm male header stripincluded!
Board Layout
Resources
- Assembly guide
- 3D Model (STEP)
Dimensions
Package Contents
- 1x Qwiic Breakout
- 1x 4-pin 2.54mm header strip
0 reviews for Qwiic Breakout
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *