Replacement Foldable OLED Display Touch Screen For Huawei P50 Pocket BAL-AL00 BAL-L49
$230.00$115.00
- Email: [email protected]
$10.99
$8.79
TheHT-CT62is a versatileLoRa/LoRaWANnode module designed for long-range communication, low power consumption, high sensitivity, and cost-effectiveness. Featuring an ESP32-C3FN4 (a 32-bit microprocessor based on RISC-V architecture) and a Semtech LoRa Transceiver (SX1262), this module integrates 2.4 GHz Wi-Fi and LoRa two-mode wireless communication. TheHT-CT62'ssmall size and stamp hole package make it ideal for smart cities, smart farms, smart homes,Meshtasticapplications, and general IoT projects. Supporting bothLoRaWANand custom LoRa implementations, it's a powerful tool for IoT makers.
Main Features
- Microprocessor: ESP32-C3FN4 (RISC-V architecture 32-bit, main frequency up to 160 MHz)
- Integrated WiFi network connection, onboard Wi-Fi, IPEX socket.
- Supports the Arduino development environment.
- LoRaWAN1.0.2 support.
- Ultra-low power design, 10uA in deep sleep.
- 1.27mm stamp edge design for SMT (Surface Mount Technology) integration.
- Excellent impedance matching for long communication range.
Specifications
| Parameters | Description |
|---|---|
| Master Chip | ESP32-C3FN4 (32-bit @ RISC-V architecture) |
| WiFi | 802.11 b/g/n, up to 150Mbps |
| LoRaChipset | SX1262 |
| Frequency | 470~510MHz, 863~928MHz |
| Max. TX Power | 211dBm |
| Max. Receiving Sensitivity | -134dBm |
| Hardware Resource | 5*ADC1+1*ADC2; 2*UART; 1*I2C; 3*SPI; 15*GPIO; etc. |
| Memory | 384KB ROM; 400KB SRAM; 8KB RTC SRAM; 4MB SiP Flash |
| Interface | 2.4G ANT (IPEX1.0);LoRaANT(IPEX1.0); 2*11*1.27mm spacing Stamp hole |
| Power Consumption | Deep Sleep 10uA |
| Operating Temperature | -40~85 |
| Dimensions | 17.78 * 17.78* 2.8mm |
Highlights
- Stamp Edge Design:The 1.27mm stamp edge design allows for direct integration into your application circuit using SMT processes.
- Arduino-Compatible:Extensive migration and development efforts ensure seamless support for the Arduino IDE, enabling stable operation with theLoRaWANprotocol.
- Excellent Performance:Superior impedance matching and a powerfulLoRachipset translate to long-range, reliable communication.
- Low Power:Ideal for battery-powered applications with its deep sleep current of only 10uA.
Pin Map
FAQ
- My serial port does not print information:When using a USB to Serial tool, connect to serial port pins 20/21 of the device, or use pins 17/18 when connecting directly via USB.
- My LoRa signal became very bad after welding:The high temperature may cause the shielding shell of the device to shift, resulting in a short circuit.
- I cant find the board in the board manager:Please selectWireless Mini Shell.
Packing List
The default packing list (without optional accessories) includes:
| Item | Quantity |
|---|---|
| HT-CT62 | x1 |
TheHT-CT62is a versatileLoRa/LoRaWANnode module designed for long-range communication, low power consumption, high sensitivity, and cost-effectiveness. Featuring an ESP32-C3FN4 (a 32-bit microprocessor based on RISC-V architecture) and a Semtech LoRa Transceiver (SX1262), this module integrates 2.4 GHz Wi-Fi and LoRa two-mode wireless communication. TheHT-CT62’ssmall size and stamp hole package make it ideal for smart cities, smart farms, smart homes,Meshtasticapplications, and general IoT projects. Supporting bothLoRaWANand custom LoRa implementations, it’s a powerful tool for IoT makers.
Main Features
- Microprocessor: ESP32-C3FN4 (RISC-V architecture 32-bit, main frequency up to 160 MHz)
- Integrated WiFi network connection, onboard Wi-Fi, IPEX socket.
- Supports the Arduino development environment.
- LoRaWAN1.0.2 support.
- Ultra-low power design, 10uA in deep sleep.
- 1.27mm stamp edge design for SMT (Surface Mount Technology) integration.
- Excellent impedance matching for long communication range.
Specifications
| Parameters | Description |
|---|---|
| Master Chip | ESP32-C3FN4 (32-bit @ RISC-V architecture) |
| WiFi | 802.11 b/g/n, up to 150Mbps |
| LoRaChipset | SX1262 |
| Frequency | 470~510MHz, 863~928MHz |
| Max. TX Power | 211dBm |
| Max. Receiving Sensitivity | -134dBm |
| Hardware Resource | 5*ADC1+1*ADC2; 2*UART; 1*I2C; 3*SPI; 15*GPIO; etc. |
| Memory | 384KB ROM; 400KB SRAM; 8KB RTC SRAM; 4MB SiP Flash |
| Interface | 2.4G ANT (IPEX1.0);LoRaANT(IPEX1.0); 2*11*1.27mm spacing Stamp hole |
| Power Consumption | Deep Sleep 10uA |
| Operating Temperature | -40~85 |
| Dimensions | 17.78 * 17.78* 2.8mm |
Highlights
- Stamp Edge Design:The 1.27mm stamp edge design allows for direct integration into your application circuit using SMT processes.
- Arduino-Compatible:Extensive migration and development efforts ensure seamless support for the Arduino IDE, enabling stable operation with theLoRaWANprotocol.
- Excellent Performance:Superior impedance matching and a powerfulLoRachipset translate to long-range, reliable communication.
- Low Power:Ideal for battery-powered applications with its deep sleep current of only 10uA.
Pin Map
FAQ
- My serial port does not print information:When using a USB to Serial tool, connect to serial port pins 20/21 of the device, or use pins 17/18 when connecting directly via USB.
- My LoRa signal became very bad after welding:The high temperature may cause the shielding shell of the device to shift, resulting in a short circuit.
- I cant find the board in the board manager:Please selectWireless Mini Shell.
Packing List
The default packing list (without optional accessories) includes:
| Item | Quantity |
|---|---|
| HT-CT62 | x1 |
0 reviews for HELTEC HT-CT62 ESP32C3 SX1262 LoRa Node Meshtastic LoRaWAN 868Mhz
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *