Yellow 3mm Water Clear LED 1000mcd 30
$11.00$7.00
- Email: [email protected]
$389.00
$149.00
Atmel-ICE Basic Kit
Powerful Development Tool For Debugging And Programming Atmel SAM And AVR Microcontrollers, Comes With Additional Adapter And Cables
Atmel-ICE is a powerful development tool for debugging and programming Atmel ARM Cortex-M based Atmel SAM and AVR microcontrollers with on-chip debug capability.
Key Features
- Supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces
- Full source-level debugging in Atmel Studio
- Supports all built-in hardware breakpoints in the target microcontroller (number depends on the OCD module in the target)
- Up to 128 software breakpoints
- 1.62 to 5.5V target operation
- USB powered
- Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out
Supported Software
- Perfectly supports Atmel Studio 6.2 or higher version
- Directly supports ICC8AVR or higher version
- Supports programming HEX files generated by ICCAVR, CVAVR, IAR, etc.
Supported Devices
- Programming and on-chip debugging of all Atmel AVR 32-bit MCUs on both JTAG and aWire interfaces
- Programming and on-chip debugging of all Atmel AVR XMEGA family devices on both JTAG and PDI 2-wire interfaces
- JTAG and SPI programming and debugging of all Atmel AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces
- Programming and debugging of all Atmel SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces
- Programming of all Atmel tinyAVR 8-bit MCUs with support for the TPI interface
For more details, please visitUC3,Mega,SAM,Tiny,Xmega
Specifications
| INTERFACE VOLTAGE | 1.62V ~ 5.5V |
|---|---|
| JTAG CLOCK | 32kHz ~ 7.5MHz |
| PDI CLOCK | 32kHz ~ 7.5MHz |
| DEBUGWIRE BAUDRATE | 4kbit/s ~ 0.5Mbit/s |
| AWIRE BAUDRATE | 7.5kbit/s ~ 7Mbit/s |
| SPI CLOCK | 8kHz ~ 5MHz |
| SWD CLOCK | 32kHz ~ 2MHz |
| PC INTERFACE | USB 2.0 high speed |
Physical Interfaces
Atmel-ICE Connection Options
Note: While connecting the adapter board to a target, please pay attention to the Pin 1 (indicated by white spot or square solder pad).
The adapter board included in Atmel-ICE-B2 is compatible with the official one in the Atmel-ICE Full Kit.
10-pin AVR JTAG header | ||||
6-pin AVR ISP/debugWIRE/PDI/aWire/TPI header | ||||
SPI/debugWIRE | PDI | aWire | TPI | 10-pin AVR ISP header is also available through our extra free 6-pin to 10-pin ISP cable |
10-pin SAM JTAG/SWD header
|
Development Resources
Wiki :www.waveshare.com/wiki/Atmel-ICE
Package Contains:
- Atmel-ICE unit x1
- USB cable (1.8m, high-speed, micro-B) x1
- IDC flat cable with 10-pin 50-mil connector and 6-pin 100-mil connector x1
- Multi-functional adapter board x1
- 10pin flat cable x1
- 10pin 100mil squid cable x1
- 6-pin to 10-pin ISP cable x1
Atmel-ICE Basic Kit
Powerful Development Tool For Debugging And Programming Atmel SAM And AVR Microcontrollers, Comes With Additional Adapter And Cables
Atmel-ICE is a powerful development tool for debugging and programming Atmel ARM Cortex-M based Atmel SAM and AVR microcontrollers with on-chip debug capability.
Key Features
- Supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces
- Full source-level debugging in Atmel Studio
- Supports all built-in hardware breakpoints in the target microcontroller (number depends on the OCD module in the target)
- Up to 128 software breakpoints
- 1.62 to 5.5V target operation
- USB powered
- Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out
Supported Software
- Perfectly supports Atmel Studio 6.2 or higher version
- Directly supports ICC8AVR or higher version
- Supports programming HEX files generated by ICCAVR, CVAVR, IAR, etc.
Supported Devices
- Programming and on-chip debugging of all Atmel AVR 32-bit MCUs on both JTAG and aWire interfaces
- Programming and on-chip debugging of all Atmel AVR XMEGA family devices on both JTAG and PDI 2-wire interfaces
- JTAG and SPI programming and debugging of all Atmel AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces
- Programming and debugging of all Atmel SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces
- Programming of all Atmel tinyAVR 8-bit MCUs with support for the TPI interface
For more details, please visitUC3,Mega,SAM,Tiny,Xmega
Specifications
| INTERFACE VOLTAGE | 1.62V ~ 5.5V |
|---|---|
| JTAG CLOCK | 32kHz ~ 7.5MHz |
| PDI CLOCK | 32kHz ~ 7.5MHz |
| DEBUGWIRE BAUDRATE | 4kbit/s ~ 0.5Mbit/s |
| AWIRE BAUDRATE | 7.5kbit/s ~ 7Mbit/s |
| SPI CLOCK | 8kHz ~ 5MHz |
| SWD CLOCK | 32kHz ~ 2MHz |
| PC INTERFACE | USB 2.0 high speed |
Physical Interfaces
Atmel-ICE Connection Options
Note: While connecting the adapter board to a target, please pay attention to the Pin 1 (indicated by white spot or square solder pad).
The adapter board included in Atmel-ICE-B2 is compatible with the official one in the Atmel-ICE Full Kit.
|
10-pin AVR JTAG header |
||||
|
6-pin AVR ISP/debugWIRE/PDI/aWire/TPI header |
||||
|
SPI/debugWIRE |
PDI | aWire | TPI |
10-pin AVR ISP header is also available through our extra free 6-pin to 10-pin ISP cable |
|
10-pin SAM JTAG/SWD header |
Development Resources
Wiki :www.waveshare.com/wiki/Atmel-ICE
Package Contains:
- Atmel-ICE unit x1
- USB cable (1.8m, high-speed, micro-B) x1
- IDC flat cable with 10-pin 50-mil connector and 6-pin 100-mil connector x1
- Multi-functional adapter board x1
- 10pin flat cable x1
- 10pin 100mil squid cable x1
- 6-pin to 10-pin ISP cable x1
0 reviews for Atmel-ICE Basic Kit, Comes with Additional Adapter and Cables
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *