Industrial High-Pressure Cleaning Drone

ABZ Innovation C10

Clean high-rise facades, rooftops, and complex structures from the air no scaffolding, cranes, or rope access. The ABZ Innovation C10 brings powerful high-pressure cleaning to heights of up to 60 meters, keeping crews safely on the ground.

Watch Video

Key Features

• Cleans at heights up to 60 m (197 ft) no scaffolding, cranes, or rope access
• High-pressure system: up to ~15 L/min flow at up to 200 bar (2,900 PSI)
• Radar collision avoidance for a safe, consistent standoff distance
• Automated Mission and Manual Flight modes
• CE, ISO, and FCC certified for commercial and industrial use
• Built on the proven ABZ M12 airframe

Dronenerds Exclusive: High-Flow Wand Modification

Available only through Dronenerds, this U.S.-market upgrade re-tunes the C10’s wand for higher flow and pressure built for exterior-cleaning work. Only the wand is modified every other part of the certified C10 system stays factory-standard. Switch between two modes to match the job.

Dronenerds Exclusive Modification

High-Pressure Mode

High-pressure cleaning

Recommended flow rate6 GPM Recommended pressure3,000 PSI Recommended pumpGas-powered

Soft-Wash Mode

Soft washing / low-pressure cleaning

Recommended flow rate14 GPM Recommended pressure300 PSI Recommended pumpGas-powered

Nozzle connector: Quick-connect interchangeable nozzles U.S. standard (J-Rod compatible)

Wand-to-hose connection: Quick-connect coupler

Modification scope: Upgraded wand only no other components are modified.

Clean At Height, Skip The Scaffolding

Built on the proven ABZ M12 airframe, the C10 reaches surfaces that are slow, costly, or dangerous to access by hand and gets the job done faster.

Reach Up To 60 Meters

Clean facades, rooftops, and structures up to roughly 197 feet without scaffolding, cranes, or rope-access crews.

Powerful High-Pressure Flow

Delivers up to about 15 L/min at up to 200 bar (2,900 PSI) to lift away dirt, algae, and stubborn grime.

Lower Cost, Lower Risk

Keeps workers on the ground and cuts the labor, equipment, and insurance overhead that come with working at height.

Rapid Deployment

Sets up and gets airborne quickly, so crews spend their time cleaning instead of rigging access equipment.

Smart Sensing, Stable Control

Onboard radar and dual flight modes keep the C10 a safe, consistent distance from the surface for controlled, repeatable cleaning even on demanding jobs.

Radar Collision Avoidance

Onboard radar maintains a safe, steady standoff from the surface for controlled, repeatable cleaning passes.

Automated Mission Mode

For large, uniform walls, the drone holds its distance and flies a pre-set cleaning loop for fast, consistent results. RTK positioning is recommended for maximum stability.

Manual Flight Mode

For irregular surfaces, obstacles, or windy sites, experienced pilots take full manual control where radar performance may be limited.

Certified For The Job

CE, ISO, and FCC certified, and engineered to hold up to the demands of commercial and industrial environments.

Built For Real Jobsites

From glass towers to solar farms, the C10 is at home wherever access is difficult, dangerous, or expensive.

High-Rise & Glass Facades

Ideal for high-rise buildings, glass curtain walls, and complex architectural structures.

Industrial Facilities, Silos & Tanks

Reaches industrial surfaces, silos, and tanks that are hazardous or costly to clean by hand.

Rooftops & Solar Panels

Cleans rooftops and solar arrays without the foot traffic that risks damage or injury.

Heritage & Hard-To-Reach

A controllable option for heritage buildings, monuments, and surfaces where access is limited.

Versatile Nozzle Options

Works with a range of professional nozzles and cleaning systems to match the surface and the task at hand.

Request a C10 Quote

hbspt.forms.create({ region: “na1”, portalId: “4149569”, formId: “1885461f-85fe-4873-86ca-cddc5b9c2331” });