- Email: [email protected]
This 7.5" ePaper Display provides a reliable, energy-efficient display solution for a variety of uses. It boasts a resolution of 800x480, black and white output, and 7.5" diagonal size. Refresh rate is fast, and the contrast ratio is exceptional, perfect for e-readers, smart wearables, and other small form-factor devices.
This 7.5" Monochrome ePaper Display offers an 800x480 active area, 1-bit white/black imaging, superior contrast, reflective performance, an expansive viewing angle, and low power consumption. It runs over a commercial temperature range, supports both landscape and portrait modes, and is built with a COG package IC, plus on-chip RAM and waveform stored in OTP. Finally, an SPI is available with an onboard oscillator, booster, and regulator for precise VCOM, Gate, and Source voltage generation.
E-Paper, also known as Electronic Paper, is a display technology that replicates the look of paper and ink. It features significant contrast, improved readability in diverse lighting, plus no need of a backlight. This is made possible by the action of tiny charged particles, floating in liquid, in microcapsules that change location when an electric field is applied. This produces varying hues for the viewer. As a result, E-Paper is favored in energy-saving and legible apps such as e-readers, electronic shelf labels, smartwatches, and more.
E-Paper displays provide advantages compared to standard displays, such as readability similar to paper, sunlight legibility, reduced energy utilization, thin design, wide viewing angles, and extended battery life-spans. These displays lend themselves to portable devices and settings where low glare and energy-efficiency are important
Parameters | Details |
Model No. | GDEY075T7 |
Type | Dot Matrix |
Size | 7.5 inch |
Active Area(mm) | 163.2 x 97.72 |
Resolution | 800 x 480 pixels |
Pixel Pitch(mm) | 0.204 x 0.204 |
Display Color | Black, White |
Grayscale | 4 |
Partial Refresh Time | 0.34s |
Full Refresh Time | 3.5s |
Interface | SPI |
Connector | 24 Pin PFC, 0.5mm Pitch |
Viewing Angle | >170 |
Operating Voltage | 3.3V |
Operating Temperature | 0-50C |
Driver Mode | Support XIAO/STM32/Arduino/Micropython |
Drawing | Support GUI Drawing |
Power Consumption | 26.4mW (typ.) |
Standby Consumption | 0.0165mW |
Outline Dimension(mm) | 170.2 x 111.2 x1.25 |
Weight | 3.2g |
7.5 Monochrome ePaper Display | 1 |
ePaper Display FAQ
Precautions for E-paper Display
| HSCODE | 8543709990 |
| USHSCODE | 8486400030 |
| UPC | |
| EUHSCODE | 8471707000 |
| COO | CHINA |
This 7.5″ ePaper Display provides a reliable, energy-efficient display solution for a variety of uses. It boasts a resolution of 800×480, black and white output, and 7.5″ diagonal size. Refresh rate is fast, and the contrast ratio is exceptional, perfect for e-readers, smart wearables, and other small form-factor devices.
This 7.5″ Monochrome ePaper Display offers an 800×480 active area, 1-bit white/black imaging, superior contrast, reflective performance, an expansive viewing angle, and low power consumption. It runs over a commercial temperature range, supports both landscape and portrait modes, and is built with a COG package IC, plus on-chip RAM and waveform stored in OTP. Finally, an SPI is available with an onboard oscillator, booster, and regulator for precise VCOM, Gate, and Source voltage generation.
E-Paper, also known as Electronic Paper, is a display technology that replicates the look of paper and ink. It features significant contrast, improved readability in diverse lighting, plus no need of a backlight. This is made possible by the action of tiny charged particles, floating in liquid, in microcapsules that change location when an electric field is applied. This produces varying hues for the viewer. As a result, E-Paper is favored in energy-saving and legible apps such as e-readers, electronic shelf labels, smartwatches, and more.
E-Paper displays provide advantages compared to standard displays, such as readability similar to paper, sunlight legibility, reduced energy utilization, thin design, wide viewing angles, and extended battery life-spans. These displays lend themselves to portable devices and settings where low glare and energy-efficiency are important
|
Parameters |
Details |
|
Model No. |
GDEY075T7 |
|
Type |
Dot Matrix |
|
Size |
7.5 inch |
|
Active Area(mm) |
163.2 x 97.72 |
|
Resolution |
800 x 480 pixels |
|
Pixel Pitch(mm) |
0.204 x 0.204 |
|
Display Color |
Black, White |
|
Grayscale |
4 |
|
Partial Refresh Time |
0.34s |
|
Full Refresh Time |
3.5s |
|
Interface |
SPI |
|
Connector |
24 Pin PFC, 0.5mm Pitch |
|
Viewing Angle |
>170 |
|
Operating Voltage |
3.3V |
|
Operating Temperature |
0-50C |
|
Driver Mode |
Support XIAO/STM32/Arduino/Micropython |
|
Drawing |
Support GUI Drawing |
|
Power Consumption |
26.4mW (typ.) |
|
Standby Consumption |
0.0165mW |
|
Outline Dimension(mm) |
170.2 x 111.2 x1.25 |
|
Weight |
3.2g |
|
7.5 Monochrome ePaper Display |
1 |
ePaper Display FAQ
Precautions for E-paper Display
| HSCODE | 8543709990 |
| USHSCODE | 8486400030 |
| UPC | |
| EUHSCODE | 8471707000 |
| COO | CHINA |
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *