2/0 Aluminum XHHW-2 Building Wire

“Engineered for budget-friendly power distribution and smooth conduit pulls, 2/0 AWG Aluminum XHHW-2 / RW90 Building Wire features compact-stranded AA-8000 aluminum alloy wrapped in a slick, low-friction XLPE jacket. Dual-rated for 600V/1000V systems and approved for wet or dry locations up to 90C, it delivers superior cost and weight savings over copper for feeder runs, branch circuits, subpanels, and raceway applications.”

Key Features & Benefits: 2/0 Aluminum XHHW-2 Wire

• Slick, Low-Friction XLPE Insulation: Features an advanced “slippery” outer compound that glides through conduit bends effortlessly without pulling lubricant or insulation damage.

• AA-8000 Series Compact Aluminum: Built with Class B compact-stranded AA-8000 series aluminum alloy, reducing wire diameter to maximize conduit fill capacity.

• Dual Voltage Rated (600V / 1000V): Rated for standard 600V systems as well as higher-voltage 1000V commercial and solar installations.

• Cost-Effective Efficiency: Provides reliable conductivity with significant weight savings and lower material costs compared to equivalent copper conductors.

• Phase Color Selection: Offered in Black, Red, White, Green, Blue, Orange, Brown, Yellow, Gray, and Purple for instant phase identification (check the dropdown for stock).

• Cut-to-Length or Bulk Spools: Order custom lengths cut by the foot to minimize job-site scrap, or purchase bulk spools for high-volume commercial runs.

Technical Specs: 2/0 Aluminum XHHW-2 Wire

• Conductor Size: 2/0

• Conductor Material: AA-8000 Series Compact Stranded Aluminum Alloy (Class B)

• Conductor Diameter: 0.376 inches (9.55 mm)

• Insulation Material: Cross-Linked Polyethylene (XLPE / XLP)

• Insulation Thickness: 0.055 inches (1.40 mm)

• Overall Diameter: 0.489 inches (12.42 mm)

• Approximate Net Weight: 163 lbs per 1,000 ft

• Ampacity (@ 75C Terminal Rating): 135 Amps

• Ampacity (@ 90C Terminal Rating): 150 Amps

• Voltage Rating: 600V / 1000V (XHHW-2) | 600V (RW90)

• Temperature Rating: -40C to 90C (Wet or Dry)

• Compliance Standards: UL 44 / CSA C22.2 No. 38, UL 1685, ANSI/NEMA WC-70 / ICEA S-95-658, ASTM B800 & B801, Federal Spec A-A-59544A, NFPA 70 (NEC), CSA C22.1

Common 2/0 AWG Aluminum XHHW-2 Applications

• 135A150A Service Entrances & Feeders: Feeding 125A, 135A, and 150A residential subpanels, detached workshops, and commercial distribution panels.

• EV Charging Infrastructure & Multi-Station Feeder Lines: Supplying high-capacity feeder lines to commercial Level 2 EV charging hubs, fleet maintenance bays, and multi-unit residential garage panels.

• Commercial Raceways & Solar Arrays: Routing heavy power distribution feeders through underground PVC or metal conduit to solar inverter combiners, HVAC disconnects, and industrial machinery.

DISCLAIMER: All values are nominal and subject to correction. Ampacities for not more than three conductors in raceway or cable or earth (directly buried), based on ambient temperature of 30C per Table 310.16 of the National Electrical Code.