- Email: [email protected]
APPLICATION:
Triplex Aluminum 8000 Series, 600V URD cable is designed for use in secondary distribution circuits, where installed in duct or direct burial applications. This cable has 3 conductors. Maximum operating temperature is not to exceed 90C in wet and dry locations. Voltage rating is 600 volts.
CONDUCTOR:
Compact bare AA-8000 series aluminum alloy, Class B stranded per ASTM. The 8000 series aluminum alloy triplex is recommended when increased flexibility is needed.
GROUND SIZE:
1 AWG
INSULATION:
Black sunlight resistant cross-linked polyethylene (XLP) insulation. The 8000 Series is RHH, RHW-2, and USE-2 rated.
AMP RATING:
Duct / Conduit - 180 Amps
Direct Bury - 245 Amps
All values are nominal and subject to correction. *Actual number of wires may differ for compressed round stranded aluminum conductors using single input wire (SIW) **Ampacity: 90C conductor temperature, 20C ambient temperature, RHO 90, 100% load factor. Single and Quadruplex based on 3/C. Neutral wire carries unbalanced load only. Reference NEC article 310.15 for NEC installations.
APPLICATION:
Triplex Aluminum 8000 Series, 600V URD cable is designed for use in secondary distribution circuits, where installed in duct or direct burial applications. This cable has 3 conductors. Maximum operating temperature is not to exceed 90C in wet and dry locations. Voltage rating is 600 volts.
CONDUCTOR:
Compact bare AA-8000 series aluminum alloy, Class B stranded per ASTM. The 8000 series aluminum alloy triplex is recommended when increased flexibility is needed.
GROUND SIZE:
1 AWG
INSULATION:
Black sunlight resistant cross-linked polyethylene (XLP) insulation. The 8000 Series is RHH, RHW-2, and USE-2 rated.
AMP RATING:
Duct / Conduit – 180 Amps
Direct Bury – 245 Amps
All values are nominal and subject to correction. *Actual number of wires may differ for compressed round stranded aluminum conductors using single input wire (SIW) **Ampacity: 90C conductor temperature, 20C ambient temperature, RHO 90, 100% load factor. Single and Quadruplex based on 3/C. Neutral wire carries unbalanced load only. Reference NEC article 310.15 for NEC installations.
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *