The iProbe
$14.00$11.20
- Email: [email protected]
$14.00
$11.20
This compact Waveshare 1.47" IPS LCD display module includes capacitive touch, uses SPI and I2C communication, and can display 262K colours.
With overall dimensions of just 41.69mm x 22.05mm, it's a neat little LCD to embed into a project, and mountingis made easier thanks to the thin bezel and rear M2 mounting posts.
Connecting to your dev board of choice is simple, thanks to theincluded 100mm assembly cable.Waveshareprovides example scriptsforRaspberry Pi,Pico,Arduino,andESP32, giving you a starting point to work from and use for your own project.
Features
- 172320 resolution
- 262K colours
- High touch screen transmittance
- Embedded JD9853 driver chip
- AXS5106L capacitive touch control chip
- SPI and I2C communication
- Supports Raspberry Pi / ESP32 / Raspberry Pi Pico / Arduino
- Online development resources and manual
Specifications
| Operating voltage | 3.3V / 5V |
| Resolution | 172 320 pixels |
| Display driver | JD9853 |
| Touch driver | AXS5106L |
| Display interface | 4-wire SPI |
| Touch interface | I2C |
| Display panel | IPS |
| Touch type | Capacitive |
| Display size | 17.75 32.93 mm |
| Module size | 22.05 41.69 mm |
Resources
- Product Wiki
Pinout
| VCC | Power (3.3V / 5V input) |
| GND | Ground |
| MISO | SPI MISO pin |
| MOSI | SPI MOSI pin |
| SCLK | SPI clock pin |
| LCD_CS | LCD chip selection, low active |
| LCD_DC | LCD data/command selection (high for data, low for command) |
| LCD_RST | LCD reset, low active |
| LCD_BL | LCD backlight |
| TP_SDA | TP data pin |
| TP_SCL | TP clock pin |
| TP_INT | TP interrupt pin |
| TP_RST | TP reset, low active |
Package Contents
- 1x 1.47" IPS LCD Display Module with Touch (172x320)
- 1x 100mm SH1.0 13-pin cable
- 1x FFC Cable
This compact Waveshare 1.47″ IPS LCD display module includes capacitive touch, uses SPI and I2C communication, and can display 262K colours.
With overall dimensions of just 41.69mm x 22.05mm, it’s a neat little LCD to embed into a project, and mountingis made easier thanks to the thin bezel and rear M2 mounting posts.
Connecting to your dev board of choice is simple, thanks to theincluded 100mm assembly cable.Waveshareprovides example scriptsforRaspberry Pi,Pico,Arduino,andESP32, giving you a starting point to work from and use for your own project.
Features
- 172320 resolution
- 262K colours
- High touch screen transmittance
- Embedded JD9853 driver chip
- AXS5106L capacitive touch control chip
- SPI and I2C communication
- Supports Raspberry Pi / ESP32 / Raspberry Pi Pico / Arduino
- Online development resources and manual
Specifications
| Operating voltage | 3.3V / 5V |
| Resolution | 172 320 pixels |
| Display driver | JD9853 |
| Touch driver | AXS5106L |
| Display interface | 4-wire SPI |
| Touch interface | I2C |
| Display panel | IPS |
| Touch type | Capacitive |
| Display size | 17.75 32.93 mm |
| Module size | 22.05 41.69 mm |
Resources
- Product Wiki
Pinout
| VCC | Power (3.3V / 5V input) |
| GND | Ground |
| MISO | SPI MISO pin |
| MOSI | SPI MOSI pin |
| SCLK | SPI clock pin |
| LCD_CS | LCD chip selection, low active |
| LCD_DC | LCD data/command selection (high for data, low for command) |
| LCD_RST | LCD reset, low active |
| LCD_BL | LCD backlight |
| TP_SDA | TP data pin |
| TP_SCL | TP clock pin |
| TP_INT | TP interrupt pin |
| TP_RST | TP reset, low active |
Package Contents
- 1x 1.47″ IPS LCD Display Module with Touch (172×320)
- 1x 100mm SH1.0 13-pin cable
- 1x FFC Cable
0 reviews for 1.47″ IPS LCD Display Module with Touch (172×320)
There are no reviews yet. Be the first to review this product!
Related Products
DJI Mic Mini Transmitter (Infinity Black)
$33.99$27.19
Add a review
Your email address will not be published. Required fields are marked *