BT2.0 Whoop Cable Pigtail (U-Shape 180

Overview

This BT2.0 whoop cable pigtail is designed for 1S Tiny Whoop / brushless whoop drones and 1S flight controller (FC) power-input modifications, especially when converting from a PH2.0 connector. BT2.0 uses 1.0mm banana connectors and is rated for 9A continuous current and 15A burst.

Need help choosing the right pigtail or checking FC solder points? Contact https:/// or support@.

Key Features

• BT2.0 interface with upgraded 1.0mm banana connector design to reduce connector internal resistance (vs PH2.0 solid pins).
• Current capability: 9A rated (continuous), 15A peak (burst).
• U-shaped version: 180 reversed cable design to reduce bending stress and improve plug-in convenience; stepped structure for easier insertion/removal.
• 22AWG lightweight wire; US standard core 0.08mm*60; silicone outer diameter 1.5mm (0.2mm thinner than standard 22AWG wire).
• Wire polarity for resoldering: blue = positive (+), white = negative (-).

Specifications

Whats Included

• BT2.0 U Cable Pigtail: 6 x BT2.0 U Male Power Cable
• BT2.0 1S Whoop Cable Pigtail: 6 x BT2.0 1S Whoop Drone Male Power Cable

Applications

• Replacing PH2.0 battery leads on 1S whoop drones
• Resoldering/modifying 1S FC power input to BT2.0 (observe polarity: blue + / white -)

Videos

Joshua Bardwell video on BT2.0 vs PH2.0

Details

BT2.0 pigtails are a simple upgrade for 1S Tiny Whoop builds when replacing older PH2.0 battery leads.

The U-shaped BT2.0 pigtail helps reduce cable bending at the plug for easier, more reliable connections.

Observe polarity when resoldering: the blue wire goes to BATT V+ and the white wire goes to BATT V-.

Clear solder-pad placement helps avoid reversed polarity during BT2.0 power-input modifications on 1S FCs.

Discharge curve comparison illustrates the lower voltage sag advantage of BT2.0 versus PH2.0 at high current.

Each pack includes multiple prewired pigtails for quick swaps or multiple Tiny Whoop builds.