Simpson H10S 5x11 5/8" Hurricane Tie G90 Galvanized

• Model No. H10S
• W (in.) 5
• H (in.) 11 5/8
• Finish Spec. Zinc Galvanized, G90
• Thickness: 18 Gauge
• Product Guide & SPECS :
  • Wood Construction connectors.View Specifications
  • Connectors for Cold-Formed Steel Construction. View Specifications
  • Seismic and Hurricane Ties / Lateral Truss Anchor.View Specifications

The H10S holds the rafter or truss on both sides for higher uplift applications with wood, concrete or concrete masonry walls. The longer bottom strap extends down the wall for higher capacity. Installation is fast and easy with the Simpson Strong-Tie Titen HD screw anchors providing higher capacity. These double-sided hurricane ties provide faster installation than using two single-sided straps.

Key Features

• Provides a connection between the truss or rafter and the wall of the structure to resist wind and seismic forces
• Provides high uplift and lateral capacity using Titen HD screw anchors
  The embossments add stiffness in crucial areas for improved performance

Installation:

• Use all specified fasteners.
• Fasteners required. To Rafters/Truss: Nails 0.131 x 1-1/2″ | To CMU or Concrete:3/8 x 4″ Titen HD screw anchors
• Connectors attached using hex-head Titen HD screw anchors.
• Products shall be installed such that the Titen HD screw anchors are not exposed to the exterior environment.
• Attach to grouted concrete block with a minimum one #5 rebar horizontal in the course.
• Hurricane ties do not replace solid blocking.
• When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind. This can force the truss plate off of the truss and compromise truss performance.