Simpson 6X Post Base, G90 Galvanized BC60

Model No. BC60
Nominal Post Size 6x
Ga. 18
W1 (in.) 5 1/2
L1 (in.) 5 1/2
H1 (in.) 3
Coating/Material Zinc Galvanized, G90

Product Guide & SPECS:View Spec Sheet

The Simpson Strong-Tie BC series offers dual purpose post cap/base for light cap or base connections. The BC60 post base is approved to be installed with the specified nails or Strong-Drive SD connector screws. The Strong-Tie BC60 post base features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

• Manufacturer Name: Simpson Strong-Tie
• Fasteners Required: Post Flange – (6) 0.162 x 3-1/2″ Nails. Base Bottom – (4) 0.162 x 3-1/2″ Nails

Installation:

• Use all specified fasteners.
• Do not install bolts into pilot holes
• BC: install with 16d commons or 16dx2 1/2″ joist hanger nails.
• Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
• To tie multiple 2x members together, the Designer must determine the fasteners required to join members to act as one unit without splitting the wood.

Note: Please see item description for specifications. Product dimensions and/or Nail or Screw holes may differ from picture.