Simpson 4 x 4 Column Cap w/SDS Screws CCQ44SDS2.5

Simpson Strong-Tie CCQ Column caps provide a high-capacity connection for column-beam combinations. This design uses Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts. The Strong-Tie CCQ44SDS2.5 post base features a Gray Paint finish for added corrosion resistance.

• Finish Spec: Gray Paint
• Manufacturer Name: Simpson Strong-Tie
• Beam Size: 4X
• For Treated Lumber: no
• Post Size: 4X
• Thickness: 7 Gauge

Key Features

• The SDS screws provide a lower profile than standard through bolts
• Certified welds for confidence in strength and loading
• Uplift loads have been increased for earthquake or wind loading
• Diamond holes for temporary fastening

Installation:

• Install with 1/4″x2 1/2″ Strong-Drive SDS Heavy-Duty Connector screws, which are provided with the column cap. (Lag screws will not achieve the same load.)
• CCOQ and ECCOQ column cap only (no straps) may be ordered for field-welding to pipe or other columns. Dimensions are same as CCQ and ECCQ.
• For rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified with any column size given. (Note that the W2 dimension on straps rotated 90 is limited by the W1 dimension.)
• Contact us for Configurable Options and Special orders

Note: Product dimensions and/or Screw holes may differ from picture. Please see item description for specifications.