BVV 1.75 Quart Pyrex Vacuum Chamber With Glass Lid

1.75 Quart Pyrex Vacuum Chamber With Glass Lid

This is a complete BestValueVac vacuum chamber setup designed built and 100% tested in Naperville, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take

-Please Refer to these charts for vacuum specifications at altitude and conversions:

• Vacuum at Altitude Chart
• Vacuum Conversion Chart

key Features:

• Pyrex Glass Vessel
• Highly Durable and Reversible Silicone Gasket
• Glycerin filled vacuum gauge
• User friendly vacuum connections that fit most vacuum pumps on the market
• 50 Micron Air filter for reducing airborne contaminants when releasing the vacuum
• Silicone vacuum pad
• 5′ of vacuum rated HVAC hose to pull a vacuum.

Compatibility Explanation:

• BestValueVacChambers are not compatible with stabilization resin (i.e. Cactus Juice, Gator Venom, Minwax etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water.
• ShatterVacchambers are not compatible with stabilization resin (i.e. Cactus Juice, Gator Venom, Minwax etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents.
• GlassVacchambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac chambers for resin infusion and wood stabilization.The lid may be cleaned with any solvent or cleaning agent.

See FAQ at the top for product safety warnings.

Pump Warranty Information:

Customers using solvents such as stabilization resins (MinWax, Gator Venom etc.), alcohol and other polar solvents must use the vacuum pumps in conjunctionwith a cold trap for evacuations in excess of 5 minutes. (Exludes Cactus Juice)

• If the consumer is using the pump for prolonged periods of time exceeding 5 minuteswe require that a cold trap is used or the pump warranty is void.
• These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motorvoiding all warranties.
• When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vaporspriorto making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener is not to be used with any vacuum pumps,EVER.(A seized motor will result within the first use.)
• To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.

For shipping info including Import/Export details visit our Shipping link at the bottom of the page.