1uF 63V 5mm Polyester Box Capacitor 10% R82DC4100AA60K
$12.00$6.00
- Email: [email protected]
$13.99
$11.19
The M5Stack Fan Module v1.1 is a cooling module designed for M5Stack stacked systems such as the Core S3, featuring a built-in STM32 microcontroller.
The module uses the I2C protocol for control, supporting fan speed reading and control, as well as stall protection. This module is primarily used for cooling in stacked systems, effectively improving the thermal performance of the system.
The air intake of Module Fan v1.1 is located at the bottom of the module. For optimal cooling performance, it is recommended to stack it on top of the module that requires cooling.
Features
- M5Stack Stacked System
- STM32 Microcontroller
- I2C Protocol Control
- Fan Speed Reading and Control
- Stall Protection Feature
- Development Platforms
- UIFlow 2.0
- Arduino IDE
Specifications
| MCU | STM32F030F4P6 |
| Communication Method | I2C (0x18) |
| Operating Voltage | 5V |
| Noise Test (ambient noise 40.8dB) | PWM 20%:48.6dB |
| PWM 60%:64.5dB | |
| PWM 100%:70.6dB | |
| Operating Power Consumption | PWM 20%:DC-5V @ 13.52mA |
| PWM 60%:DC-5V @ 56.19mA | |
| PWM 100%:DC-5V @ 125.14mA | |
| Standby Power Consumption | DC-5V @ 503.49uA |
| Fan Speed | 11500RPM 10% |
| Maximum Airflow | 1.23 CFM |
| Fan Speed Control | Supports fan speed reading and PWM control |
| Stall Protection | Supports stall protection feature |
| Operating Temperature | 0-40C |
| Product Size | 54.0 x 54.0 x 13.1mm |
| Product Weight | 14.9g |
Resources
- Product Wiki
- Arduino Guide
- Arduino Library
- UiFlow2 Documentation
- Internal Firmware
- I2C Protocol
- Fan Datasheet
- Dimensions
- Schematics
Package Contents
- 1x Module Fan v1.1
The M5Stack Fan Module v1.1 is a cooling module designed for M5Stack stacked systems such as the Core S3, featuring a built-in STM32 microcontroller.
The module uses the I2C protocol for control, supporting fan speed reading and control, as well as stall protection. This module is primarily used for cooling in stacked systems, effectively improving the thermal performance of the system.
The air intake of Module Fan v1.1 is located at the bottom of the module. For optimal cooling performance, it is recommended to stack it on top of the module that requires cooling.
Features
- M5Stack Stacked System
- STM32 Microcontroller
- I2C Protocol Control
- Fan Speed Reading and Control
- Stall Protection Feature
- Development Platforms
- UIFlow 2.0
- Arduino IDE
Specifications
| MCU | STM32F030F4P6 |
| Communication Method | I2C (0x18) |
| Operating Voltage | 5V |
| Noise Test (ambient noise 40.8dB) |
PWM 20%:48.6dB |
| PWM 60%:64.5dB | |
| PWM 100%:70.6dB | |
| Operating Power Consumption | PWM 20%:DC-5V @ 13.52mA |
| PWM 60%:DC-5V @ 56.19mA | |
| PWM 100%:DC-5V @ 125.14mA | |
| Standby Power Consumption | DC-5V @ 503.49uA |
| Fan Speed | 11500RPM 10% |
| Maximum Airflow | 1.23 CFM |
| Fan Speed Control | Supports fan speed reading and PWM control |
| Stall Protection | Supports stall protection feature |
| Operating Temperature | 0-40C |
| Product Size | 54.0 x 54.0 x 13.1mm |
| Product Weight | 14.9g |
Resources
- Product Wiki
- Arduino Guide
- Arduino Library
- UiFlow2 Documentation
- Internal Firmware
- I2C Protocol
- Fan Datasheet
- Dimensions
- Schematics
Package Contents
- 1x Module Fan v1.1
0 reviews for M5Stack Fan Module v1.1 (STM32F030)
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *