Pololu Wheel Pair for Standard Servo Splines (25T, 5.8mm) - 708mm, White
$9.00$7.20
- Email: [email protected]
$11.00
$9.00
Low-friction PTFE Tube for 3D Printer Filament
This PTFE tube provides exceptional smoothness for guiding 3D printing filament, even over long distances of up to 1 meters. The filament glides effortlessly from the extruder to the hot end, thanks to the inherent lubricity of PTFE. It also boasts impressive heat resistance, withstanding temperatures between -65C and 260C. However, prolonged exposure to high temperatures without filament can cause slow melting.
The non-stick surface of the tube prevents most materials from adhering to it. While typically white, it also comes in various colors like red, blue, black, and clear, but these offer no functional difference.
For optimal printing results, ensure a clean and precise cut at the tube's end. Imperfect cuts can hinder filament flow or cause melting that could block the tube.
Specifications
| Material | PTFE | ||
|---|---|---|---|
| Color | White | ||
| Operating Temperature | -65C to 260C | ||
| Tensile Strength | 25MPa | ||
| Dielectric Strength | 26kV/mm | ||
| Elongation at Break | 300% | ||
| Density | 2.20g/cm3 | ||
| Outer Diameter | 4mm | ||
| Inner Diameter | 2mm | ||
| Length | 1m per unit |
Low-friction PTFE Tube for 3D Printer Filament
This PTFE tube provides exceptional smoothness for guiding 3D printing filament, even over long distances of up to 1 meters. The filament glides effortlessly from the extruder to the hot end, thanks to the inherent lubricity of PTFE. It also boasts impressive heat resistance, withstanding temperatures between -65C and 260C. However, prolonged exposure to high temperatures without filament can cause slow melting.
The non-stick surface of the tube prevents most materials from adhering to it. While typically white, it also comes in various colors like red, blue, black, and clear, but these offer no functional difference.
For optimal printing results, ensure a clean and precise cut at the tube’s end. Imperfect cuts can hinder filament flow or cause melting that could block the tube.
Specifications
| Material | PTFE | ||
|---|---|---|---|
| Color | White | ||
| Operating Temperature | -65C to 260C | ||
| Tensile Strength | 25MPa | ||
| Dielectric Strength | 26kV/mm | ||
| Elongation at Break | 300% | ||
| Density | 2.20g/cm3 | ||
| Outer Diameter | 4mm | ||
| Inner Diameter | 2mm | ||
| Length | 1m per unit |
0 reviews for Ptfe Teflon Tube Outer 4mm Inner 2mm Per Meter
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *