Pololu Wheel Pair for Standard Servo Splines (25T, 5.8mm) - 708mm, White
$9.00$7.20
- Email: [email protected]
$60.00
$30.00
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino.
Sample Code For Reference[Github]
If you need technical support please check the below link to find more details.
Meshtastic Firmware
LILYGO Lora Series
Specifications
| MCU | ESP32 |
| Flash | 4MB |
| PSRAM | 8MB |
| Serial Chip | CH9102 |
| Wireless protocol | Wi-Fi + Bluetooth 4.2 |
| PMU | AXP2101 |
| Onboard functions | 3 Buttons (Power+IO38+Reset) |
| Antenna | 3D WiFi Antenna [Use by default] (Support WiFi IPEX external antenna, but you need to jump resistance) LoRa antenna GPS ceramic antenna |
GPS
- NE0-6M GPS Modules: Support GPS protocol
- Onboard RTC crystal, Support interrupt/ wakeup
LoRa
- Long Range Low Power LoRa Transceiver
- High sensitivity: -i48dBm
- Transceive rate: 300 kbps
- Optional Hardware
- Version: SX1278[433Mhz] / SX1276[868/915/923Mhz]
Display Details
- OLED:0.96inch
- Driver:SSD1306
Software
- Meshtastic
Power Supply Mode
Support USB Micro/ 18650 battery holder[USB can power the battery]
Product Display
Appearance
Size
Pin Diagram
Shopping List
[Pay attention to the OLED when opening the box, ship without 18650 battery]
433Mhz Option
(OLED Not Soldered Version)
1 X T-Beam
1 X 433Mhz Antenna
1 X0.96 inch 128X64 OLED
2 XPin
433Mhz Option
(OLED Soldered Version)
1 X T-Beam (Include Soldered OLED)
1 X 433Mhz Antenna
2 X Pin
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino.
Sample Code For Reference[Github]
If you need technical support please check the below link to find more details.
Meshtastic Firmware
LILYGO Lora Series
Specifications
| MCU | ESP32 |
| Flash | 4MB |
| PSRAM | 8MB |
| Serial Chip | CH9102 |
| Wireless protocol | Wi-Fi + Bluetooth 4.2 |
| PMU | AXP2101 |
| Onboard functions | 3 Buttons (Power+IO38+Reset) |
| Antenna |
3D WiFi Antenna [Use by default] (Support WiFi IPEX external antenna, but you need to jump resistance) LoRa antenna GPS ceramic antenna |
GPS
- NE0-6M GPS Modules: Support GPS protocol
- Onboard RTC crystal, Support interrupt/ wakeup
LoRa
- Long Range Low Power LoRa Transceiver
- High sensitivity: -i48dBm
- Transceive rate: 300 kbps
- Optional Hardware
- Version: SX1278[433Mhz] / SX1276[868/915/923Mhz]
Display Details
- OLED:0.96inch
- Driver:SSD1306
Software
- Meshtastic
Power Supply Mode
Support USB Micro/ 18650 battery holder[USB can power the battery]
Product Display
Appearance
Size
Pin Diagram
Shopping List
[Pay attention to the OLED when opening the box, ship without 18650 battery]
433Mhz Option
(OLED Not Soldered Version)
-
1 X T-Beam
-
1 X 433Mhz Antenna
-
1 X0.96 inch 128X64 OLED
-
2 XPin
433Mhz Option
(OLED Soldered Version)
-
1 X T-Beam (Include Soldered OLED)
-
1 X 433Mhz Antenna
-
2 X Pin
0 reviews for LILYGO T-Beam Meshtastic ESP32 LoRa 433MHZ Wireless Module
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *