Radium Engineering Fuel Cell Subharness Kit Universal (20-0774)

Radium Engineering Fuel Cell Subharness Kit The fuel cell subharness kit is a great addition for quicker pit stops. It is common for racers to have a spare drop-in FCST-X fuel pump module in the pit in case there is an issue with a fuel pump, electrical wiring, etc. With a subharness on both FCST-X units, the entire pump assembly can be swapped quicly without any tools. RADIUM ENGINEERING FCST-X (or FCST): Each of the 26 preterminated 10awg wires has a unique identification labels associated with the FCST-X labeling. However, they can still be used with the older FCST that has slightly different labeling. RADIUM ENGINEERING RA-SERIES FUEL CELLS: Designed specifically to mount on the perimeter of RA-Series Fuel Cells. For another fuel cell to be directly compatible, the bolt spacing must be 3.6″-5.7″ (91-145mm). The bolt hole distance of the bulkhead mount is compatible with all Radium Engineering RA-series fuel cells. It can be mounted anywhere along the perimeter of the fuel cell. Furthermore, the mount can be rotated inwards or outwards for a 3in (76mm) location difference. Applications Universal FCST Universal FCST-X Universal RA-Series What’s In The Box? 1 – Anodized aluminum fuel cell mounting bracket 1 – Environmentally sealed female CPC bulkhead connector 1 – Environmentally sealed male CPC connector 16 – Stamped 14-10awg open barrel female contacts 16 – Stamped 14-10awg open barrel male contacts 1 – Black rubber boot, straight 1 – Black rubber boot, right angle 1 – Bulkhead panel hex nut 1 – Bulkhead locking wave washer 25 – Plugs for empty cavities 5 – Cable zip-ties 26 – Labeled 10awg wire with preterminated ring terminals References Installation Instructions Warranty Limited Manufacturers Warranty